Special Fax Modes - Sharp MX-7001N Quick Start Manual

SPECIAL FAX MODES

The special modes can be used for a variety of special-purpose fax transmission jobs.
The following pages show the types of fax transmissions that can be performed. (The procedures for using each
special mode are not explained.)
Each special mode has its own settings and steps, however, the basic procedure is the same for all modes. The
basic procedure for selecting a special mode is explained on the next page using "Erase" as an example.
For the procedures for using the special modes, see "5. SPECIAL MODES" in the Facsimile Guide.
Special modes
Scan Internet Fax
Address Book
Original
Scan:
Direct TX
Exposure
Sub Address
Resolution
Standard
Address Review Special Modes
File
Quick File
Fax Memory:100%
1st screen
Fax/Special Modes
Program
Erase
Timer
Job Mixed Size
Build
Original
File Quick File
When a special mode key encircled by
When any other special mode key is touched, a screen appears to let you select settings for that mode.
The keys that appear vary by country and region and the peripheral devices that are installed.
78
Fax USB Mem. Scan PC Scan
Auto A4 Auto
Send:
Auto
Auto Reception
OK
Dual Page
Scan
1
2
2in1 Card Shot
Slow Scan
Mode
is touched, the key is highlighted and the setting is completed.
To use a special mode, open the special modes
menu and touch the key of mode that you wish to
use. The menu consists of two screens. Use the
keys to switch between the screens.
Touch the [Special Modes] key in the base screen to
open the special modes menu.
2nd screen
Fax/Special Modes
Transaction
Report
Memory Box Polling
OK
Own Name
Select
2
2