Sharp MX-7001N Quick Start Manual page 83

Sending a large number of pages as a single
transmission job (Job Build)
A stack of originals higher than the
indicator line on the automatic document
feeder cannot be fed through the feeder.
The job build function lets you divide the
stack of originals into sets, feed each set,
and send the sets as a single
transmission.
Sending a fax directly from a computer (PC-Fax)
A document on a computer can be sent
via the machine as a fax. Select the
PC-Fax driver as the printer driver on your
computer and then select the Print
command in the software application.
Image data for transmission will be
created and sent as a fax.
This function can only be used on a
Windows computer.
For more information, see the Help file for the PC-Fax driver.
The machine also has these functions
• Forwarding a received fax to an e-mail address (Inbound Routing Settings)
For more information on this function, see "4. FAX RECEPTION" in the Facsimile Guide.
• Sending a fax at a specified time (Timer)
• Storing fax operations (Program)
• Temporarily changing the sender information (Own Name Select)
• Transmitting originals of different sizes (Mixed Size Original)
• Faxing thin originals (Slow Scan Mode)
• Calling a fax machine and initiating fax reception (Polling)
• Sending a fax when another machine polls your machine (Polling Memory)
For more information on these functions, see "5. SPECIAL MODES" in the Facsimile Guide.
• Performing F-code communication
For more information on this function, see "6. PERFORMING F-CODE COMMUNICATION" in the Facsimile
Guide.
• Connecting and using an existing phone (Extension Phone Connection)
For more information on this function, see "7. USING AN EXTENSION PHONE" in the Facsimile Guide.
• Changing the print settings for the transaction report (Transaction Report)
For more information on this function, see "9. PRINTING A TRANSACTION REPORT / IMAGE SENDING
ACTIVITY REPORT" in the Facsimile Guide.
Transmission
Transmission
81