Deleting Commands - Mitsubishi Electric GOT SIMPLE Series User Manual

Deleting commands

Deletes one command at a time from a sequence program.
Operation
Stop the FX PLC
(DELETE mode)
When moving the cursor to the position where the command is to be deleted.
Place the cursor on the command line (the line on which the step number is displayed).
You cannot delete the command if the cursor is placed on the line of an operand or set value.
Example
Deleting "OUT T10 K100"
Stop the FX PLC
MODE
Move the cursor to the command to be
deleted with
16 GOT SELF CHECK (DEBUG)
250
16.2 FX List Editor
MODE
Move the cursor to the command to be deleted.
< READ >
Set the
DELETE
<DELETE >
mode.
, or the key.
STEP
8 LD M 10
9 OUT T 10
K 100
12 LD X 002
GO
8 LD M 10
9 LD X 002
10 OR X 020Z1
13 AND D 1500.F
GO