Operation Setting (Settings For Operation); Operation Setting Functions - Mitsubishi Electric GOT SIMPLE Series User Manual

12.2

Operation Setting (Settings for Operation)

Operation setting functions

Setting regarding GOT operation can be set.
The items which can be set are described below. If touch the each item part, the respective setting becomes possible.
Function
Buzzer volume
Window move buzzer
Key reaction
Calibration
Utility call
*1 The more the value set for [Key reaction] is high, the more the key reaction speed slows.
"Key reaction" [ms]
For example, when the GOT recognizes touching the GOT screen once as touching the screen twice, set a higher value for [Key
reaction].
Operation setting by GT Designer3
Set buzzer volume and window move buzzer volume by selecting [Common]
[GOT Setup] of GT Designer3.
When change a part of the setting, change the setting by the GOT display setting after downloading the
project data.
GT Designer3 (GOT2000) Screen Design Manual
12 DISPLAY AND OPERATION SETTINGS (GOT SET UP)
108
12.2 Operation Setting (Settings for Operation)
Description
Buzzer volume setting can be changed.
Whether turn ON/OFF buzzer when move window can be selected.
The touch panel sensitivity when touching the GOT screen can be set. (For preventing
chattering)
Calibrates the touch panel sensitivity
Page 111 Position correction of the touch panel (touch panel calibration setting)
Utility call key setting screen can be displayed
Page 113 Setting the utility call keys
Standard ( 0) +10
±
+20 +40 +80
Setting range
OFF/SHORT/LONG
(At factory shipment: SHORT)
ON/OFF
(At factory shipment: ON)
*1
±0 to +120
-
-
+120
[GOT Environmental Setting]