Keyword - Mitsubishi Electric GOT SIMPLE Series User Manual

Keyword

Registers, deletes, releases protection for, and sets protection for the FX PLC keywords.
Function usability of the MELSEC-FX list editor for keyword protection levels
The functions that can be used with the MELSEC-FX list editor depend on the keyword protection level.
: Available, : Unavailable
Function
Reading Displaying sequence
sequence programs
programs
Searching
commands/devices
Writing Writing commands
sequence
Changing operands/
programs
set values
Inserting commands
Deleting commands
Sequence program all clear
PLC diagnostics
Parameter setting
*1 When the 2nd keyword is set to an FX PLC that supports 2nd keyword, it becomes " " (cannot be used).
*2 The names within the parentheses ( ) are for when a keyword + 2nd keyword is set.
Operation
[Keyword setup]
OP
16 GOT SELF CHECK (DEBUG)
256
16.2 FX List Editor
Keyword protection level
All operation Read/Incorrect
protect write
(All on-line protection
operation (Read/Write
*2 *2
protect) protection)
*1
GO
Select [Keyword setup] with
OP
GO
Erroneous Keyword not
write registered/
prohibition keyword
(Write protection
*2
protection) canceled
or .
Reference
Page 241 Displaying sequence
programs
Page 243 Searching commands/
devices
Page 245 Writing commands
Page 250 Deleting commands
Page 245 Writing commands
Page 250 Deleting commands
Page 251 Sequence program all clear
Page 252 PLC diagnostics
Page 254 Parameter setting