Dts; Dynamic Compression - Samsung DVD-V2500 Instruction Manual

01A DVD-V2500/XAC-Eng2 6/19/02 9:03 AM

DTS

If your A/V receiver is equipped with a DTS decoder, your DVD-
Enter
VCR can output DTS digital sound, but you MUST enable this
Return
feature in the menu system.
Language
Digital Output PCM
DVD Setup
DVD DVD
NOTE: Select "On" ONLY if you have connected a DTS-equipped
On
DTS Off
VCR Setup
Off

Dynamic Compression

On A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on
Option
2x Scan Audio Off
the DVD-VCR back panel.
Program TV Aspect Wide
Parental
28
Page 28
1 Open "SETUP MENU"
With the DVD in stop mode, press the SETUP button.
2 Select "DVD Setup"
Using the up and down buttons, move the selection cursor to "DVD
Setup," then press ENTER to select.
3 Set "DTS"
Move the selection bar to "DTS," then press right or left to select
from the following options:
• Off - To use your DVD/TV with an A/V receiver NOT equipped
with a DTS decoder.
• On – To use your DVD/TV with an A/V receiver equipped with a
DTS decoder.
Dynamic Compression
Dynamic Compression restrains the dynamic range of sound, i.e.
the difference between the calm and noisy passage of a DVD audio
track.
1 Open "SETUP MENU"
With the DVD in stop mode, press the SETUP button.
2 Select "DVD Setup"
Using the up/down and left/right buttons, move the selection cursor
to "DVD Setup," then press ENTER to select.
3 Set "Dynamic Compression"
Move the selection bar to "Dynamic Compression," then press
right or left to select from the following options:
• On - The total dynamic range of the DVD soundtrack will be
compressed, so quiet passages will be louder and loud
passages will be softer.
• Off – The original dynamic range will be preserved.
Enter
Return
Language
Digital Output PCM
DVD Setup
DVD DVD
DTS Off
VCR Setup
On
Dynamic Compression On
Option
Off
2x Scan Audio Off
Program TV Aspect Wide
Parental
29