Deck Control Buttons; Basic Dvd Operation; Basic Vcr Operation - Samsung DVD-V2500 Instruction Manual

01A DVD-V2500/XAC-Eng2 6/19/02 9:02 AM

Deck Control Buttons

The DVD-VCR uses one set of controls to operate both decks. The
following buttons are helpful in successfully controlling each deck.
1
4
2
3

Basic DVD Operation

Follow the instructions to playback a DVD.
OPEN/CLOSE
1
1
4
4
14
Page 14
1 POWER Button
Press the POWER button on the remote control or front panel to
turn on the DVD-VCR.
2 DVD Button
Press the DVD button on the remote control or front panel when
you want to control the DVD deck.
• The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
3 VCR Button
Press the VCR button on the remote control or front panel when
you want to control the VCR deck.
• The VCR indicator will light on the Front Panel Display to show
that the VHS deck is selected.
4 INPUT SEL. Button
Press the INPUT SEL. button repeatedly to cycle through all of
your input sources, including the Tuner (Ch##), Line 1 (rear AV
input), and Line 2 (front AV input).
• It is only available when VCR deck is selected.
1 Open the Disc Tray
Press the Open/Close button on your remote or front panel to both
power-on and open the tray.
2 Insert a Disc
Put a disc in the center of the tray, facing up the label-printed side
of the disc.
3 Close the Disc Tray
Press the Open/Close button on your remote or front panel to close
the tray.
4 Play a DVD
Press the Play/Pause button on your remote or front panel.
• Most discs will start to playback as soon as the tray closes.
• If a DVD has a disc menu, the menu may pop up on TV screen.
5 Additional DVD Options
• For advanced DVD Setup options, see pages 24~31.
• For special DVD Playback features, see pages 33~42.

Basic VCR Operation

To play a videotape, simply insert it in the VHS deck and press the
Play button. Tapes without Record Safety Tabs can be set to play
automatically when inserted; see page 56.
1 Insert VHS Tape
Insert a standard VHS videotape into the VHS Deck.
• Power will turn on automatically when you insert a videotape.
2 Play Tape
❿
Press the ll (Play/Pause) button on the remote control or front
panel. If the tape is missing the Record Safety Tab and Auto Play
is turned on, the tape will begin to play automatically, see page 56.
3 Stop Playback
Press the I (Stop) button on the remote control or front panel.
4 Eject Tape
Press the OPEN/CLOSE button on the remote control or the
EJECT button on the front panel.
5 Additional VCR Options
• For special VCR Playback features, see pages 54~56.
• For VCR Recording features, see pages 57~60.
• For Timer Recording features, see page 60.
OPEN/CLOSE EJECT
.... ....
DVD SELECT VCR
1
AUDIO
CHANNEL REC VIDEO L R
LINE IN 2
3
2
EJECT
.... ....
4 DVD SELECT VCR
L AUDIO R
CHANNEL REC VIDEO
LINE IN 2
15