Parental; Digital Output - Samsung DVD-V2500 Instruction Manual

01A DVD-V2500/XAC-Eng2 6/19/02 9:03 AM

Parental

Rating Control is a password protected system that allows you to
Enter
block playback of DVDs based on their content. The system uses an
Return
eight level rating system.
Language
• If you try to play a DVD that exceeds the selected rating, an error
Use Password Off
DVD Setup
DVD DVD
VCR Setup
• Not all discs are rated.
Option
Program
Parental
Enter
Return
Language
Use Password
DVD Setup
Enter Password
DVD DVD
? - - -
Create
VCR Setup
Password Parental
Option
Program
Parental
Enter
Return
Language
Use Password On
DVD Setup
DVD DVD
Rating Level 1
VCR Setup
Change Password
Option
Program
Parental
Enter
Return
Language
Use Password
DVD Setup
DVD DVD
Rating Level 1
VCR Setup
Change Password
Option
Program
Parental
Enter
Return
Language
DVD Setup
DVD DVD
VCR Setup
Rating Level
Parental
1
Kids Safe 1
Option
Rating Level
8
Program
Parental
26
Page 26
message will appear.
1 Open "SETUP MENU"
With the DVD in stop mode, press the SETUP button.
2 Select "Parental"
Using the up and down buttons, move the selection cursor to
"Parental," then press ENTER to select.
3 Select "Use Password"
Move the selection arrow to "Use Password," then press the
right/left button to select from the following options:
• Off - Indicates that no password is required to view any DVD
disc or to change Rating Control options. No additional Rating
Control settings are necessary.
• On – Indicates that a password is required to view some DVD
discs and to view Rating Control options. The menu will change
as shown.
NOTES:
• The first time "Enter Password" is set to "On," you will be
prompted to enter a new password.
• If the "Enter Password" screen appears, then "Re-enter
Password" has already been set to "Yes." Please skip to Step 5.
4 Enter Password
Enter a 4-digit password using the 0–9 buttons on the remote
control.
• Write your password down, and keep it in a safe place in case
you need it to change your settings later.
5 Select "Rating Level"
Move the selection bar to "Rating Level," then press ENTER to
select.
6 Change Rating Level
Use the up/down to select one of the following ratings:
• Level 8 Adult • Level 4
• Level 7 • Level 3
• Level 6 • Level 2
• Level 5 • Level 1 Kids Safe
All ratings above the level you select will also be blocked, e.g., if
you block Level 6, then Levels 7 and 8 will also be blocked.
Press ENTER to confirm your selection.
• If you forgot your password, press power on from a cold start
with no disc in the unit. Press the REW and F.F buttons
simultaneously on the front panel for 5 seconds.

Digital Output

If your A/V receiver is equipped with a Dolby Digital decoder, your
DVD-VCR can output Dolby Digital 5.1 sound, but you MUST
enable this feature in the menu system to prevent damage to your
speakers.
NOTE: Select "Bitstream" ONLY if you have connected a Dolby
Digital-equipped A/V receiver to the Digital Output
(optical or coaxial) on the DVD-VCR back panel.
1 Open "SETUP MENU"
With the DVD in stop mode, press the SETUP button.
2 Select "DVD Setup"
Using the up and down buttons, move the selection cursor to "DVD
Setup," then press ENTER to select.
3 Set "Digital Output"
Move the selection bar to "Digital Output" then press the right/left
button to select from the following options:
• PCM - To use your DVD/TV with an A/V receiver NOT equipped
with a Dolby Digital decoder.
• Bitstream – To use your DVD/TV with an A/V receiver equipped
with a Dolby Digital decoder.
Enter
Return
Language
PCM
Digital Output PCM
DVD Setup
DVD DVD Bitstream
DTS Off
VCR Setup
Dynamic Compression On
Option
2x Scan Audio Off
TV Aspect Wide
Program
Parental
27