Draytek Vigor2865 Series Quick Start Manual page 15

Right
LED
The port "WAN2 / P6" is switchable. It can be used for LAN connection or WAN
connection according to the settings configured in WUI.
Interface
Wireless LAN
ON/OFF/WPS
Factory Reset
USB1~2
WAN2 / P6
LAN P1-P5
Phone 1/2
DSL
PWR
ON/OFF
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps
Description
Wireless band will be switched /changed according to the
button pressed and released. For example,
 2.4G (On) and 5G (On) – in default.
 2.4G (Off) and 5G (On) – pressed and released the button
once.
 2.4G (On) and 5G (Off) – pressed and released the button
twice.
 2.4G (Off) and 5G (Off) – pressed and released the
button three times.
When WPS function is enabled by web user interface, press
this button for more than 2 seconds to wait for client's
device making network connection through WPS.
Restore the default settings. Usage: Turn on the router (ACT
LED is blinking). Press the hole and keep for more than 5
seconds. When you see the ACT LED begins to blink rapidly
than usual, release the button. Then the router will restart
with the factory default configuration.
Connecter for a USB device (for 3G/4G USB Modem or
printer or thermometer).
Connecter for local network devices or modem for accessing
Internet.
Connecters for local network devices.
Connecter for analog phone(s).
Connecter for accessing the Internet.
Connecter for installing WLAN antennas.
Connecter for a power adapter.
Power Switch.
9