Draytek Vigor2865 Series Quick Start Manual page 11

DMZ
LED on Connector
Left
WAN2
LED
/ P6
Right
LED
Left
LAN
LED
P1~P5
Right
LED
The port "WAN2 / P6" is switchable. It can be used for LAN connection or WAN
connection according to the settings configured in WUI.
WLAN: Wireless access point is ready.
Off Wireless function is disabled.
It will blink slowly while wireless traffic goes
Blinking
through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and will
return to normal condition after two minutes.
(You need to setup WPS within 2 minutes.)
On The DMZ function is enabled.
Off The DMZ function is disabled.
Blinking The data is transmitting.
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps.
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps
5