Remote Management Module Installation and Maintenance Practice
Circuit ID
Figure 15
illustrates the Circuit ID assignment screen. The Circuit ID is a user-definable
string that can distinguish one circuit from another, by naming each circuit according to a
designated internal naming convention. The Circuit ID has a maximum length of 30
characters.
The Circuit ID, once entered, appears in the header of each screen.
Shelf:
1
Unacknowledged Alarms:
To remove a Circuit ID, leaving the field blank in the headers, press the
ID field, and then press
MAINTENANCE
The Total Access 3000 Remote Management Module does not require routine maintenance for
normal operation.
ADTRAN does not recommend that repairs be attempted in the field. Repair services may be
obtained by returning the defective unit to ADTRAN. Refer to
further information.
28
Slot:
4
Total Access System
Circuit ID :
Circuit ID
Circuit ID :
Enter New Circuit ID :
'?' - System Help Screen
Figure 15. Circuit ID Screen
.
E
NTER
10/20/05 16:09
in the Circuit
SPACEBAR
"Appendix A, Warranty"
for
61181019L1-5C