Provisioning; Figure 5. Provisioning Menu - ADTRAN Total Access 3000 Installation And Maintenance Practice

Provisioning

Figure 5 illustrates the RMM Provisioning menu. Use this screen to make provisioning
changes to module performance parameters. Provisioning changes can be made when the unit
is in any of its three service states.
Some provisioning changes can momentarily disrupt traffic. If a
selected change has the potential to be service affecting, a system
prompt for confirmation is displayed.
Shelf: 1
Unacknowledged Alarms:
The Provisioning menu includes the following options:
• "CSU Code Loop Detect"
• "DS1 Timing Source"
• "DS1 Network Source"
• "DSX-1 Line Build Out"
• "DSX-1 Line Coding"
• "External Alarms"
• "Service State" on page 17
• "Restore Factory Defaults"
• "Software Update"
61181019L1-5C
CAUTION
Slot: 4 Total Access System
Circuit ID :
RMM Provisioning
1. CSU Loop Code Detect
2. DS1 Timing Source
3. DS1 Network Source
4. DSX-1 Line Build Out
5. DSX-1 Line Coding
6. External Alarms
7. Service State
8. Restore Factory Defaults
9. Software Update
Selection :
'?' - System Help Screen

Figure 5. Provisioning Menu

on page 16
on page 16
on page 16
on page 16
on page 16
on page 17
on page 17
on page 18
10/20/05 11:33
: Enabled
: Recovered
: MUX
: 0 - 133 ft
: B8ZS
: In Service
Menu Structure
15