Remote Management Module Installation and Maintenance Practice
Software Update
Use Software Update to download new software to the RMM, as available. Software Update
supports two transfer protocols: TFTP or YModem.
YModem Update
To update software via YModem:
1. From the Software Upgrade menu, select
The YModem Software Update screen
Shelf:
1
Unacknowledged Alarms:
This utility programs the RMM. The VT100 terminal emulation
program used must support YMODEM file transfers and have access
to the software binary file (*.bin).
2. Select
Start Transfer
A series of
s begins to appear at the
C
YModem file transfer.
3. Use the desired YModem application to send the required binary file, and wait for the
transfer to complete.
18
(Figure
Slot:
4
Total Access System
Circuit ID :
YMODEM Software Update
App Software Rev
App Code Chksum
Build Date
Boot Software Rev
Boot Code Chksum
Download Status
1.
Start Transfer
Selection:
'?' - System Help Screen
Figure 6. YModem Software Update
, and press
.
E
NTER
Selection:
, and press
YModem Update
6) appears.
: B00.06
: 1B29DD9D
: Mon Oct 03 14:07:55 2005
: A05
: 586C
: Idle
prompt, indicating the RMM is awaiting
.
E
NTER
10/21/05 10:15
61181019L1-5C