Installing The Ink Cartridge - Pitney Bowes SendPro С Lite Quick Reference Manual

1. Check the level of sealing solution in your moistener tank.
2. Add enough E-Z Seal® to bring the sealant level up to the bottom of the fill hole. Do not overfill your
tank.
3. If the tank is empty, allow 30 minutes for the moistener brush and wick to get completely saturated.

Installing the ink cartridge

Your device uses ink from the ink cartridges during normal maintenance cycles. You must maintain
adequate ink supply in all of the cartridges to keep the system in optimal working condition. Replace your
ink cartridges, printhead and other similar printing consumables promptly when warned.
Your devicewill periodically require a new ink cartridge.
1. Tap the Settings icon on the toolbar.
2. Scroll down and tap Mail Printer Maintenance.
3. Tap Install Ink.
4. Lift the cover. The ink cartridge moves to the front position.
5. Remove the ink cartridge, as shown on the label next to the cartridge holder.
6. Insert the new ink cartridge and close the cover. The cartridge repositions itself and the Mail Printer
Maintenance screen re-displays.
7. Perform a print test to ensure you get a good test print pattern.
Important: Only use genuine Pitney Bowes ink cartridges. Non-Pitney Bowes cartridges can damage
your device. If you need ink, order a genuine Pitney Bowes replacement ink cartridge. When your device
shows the low ink warning an ink cartridge will be ordered for you automatically, if you are enrolled in the
AutoInk program. You can enable AutoInk through My Account on the Pitney Bowes website.
If you are enabled in the AutoInk program an ink cartridge will be ordered for you automatically when your
device shows the low ink warning. To enroll in the in the AutoInk program please contact Pitney Bowes.
Pitney Bowes Quick Start Guide March 2020 26