Filling The Moistener Tank - Pitney Bowes SendPro С Lite Quick Reference Manual

1. Check the level of sealing solution in the moistener tank and add more if required.
2. When feeding an envelope, be sure to slide the envelope flap under the edge of the feed deck, so
the moistener can wet the flap.
Note: If the moistener tank is full and your envelopes do not seal correctly, clean or replace the
moistener brush and wick.

Filling the moistener tank

Your device will periodically need refills of E-Z Seal® in order to seal envelopes. Follow these steps to fill
the moistener tank.
Pitney Bowes Quick Start Guide March 2020 25