Honda CRF250R 2018 Owner's Manual page 95

Suspension
4. Loosen the fork bridge upper pinch bolts (8).
5. Loosen the fork bolt assembly (9), but do not
remove it yet.
6. Loosen the fork damper assembly (10) using
the lock nut wrench (11), but do not remove it
yet.
• Lock nut wrench 07WMA-KZ30100
The procedure is the same for the both right and
left fork legs.
NOTICE
Do not use an adjustable wrench to loosen the fork
damper: it may damage the fork damper.
(11)
(9)
(8) fork bridge upper pinch bolts
(9) fork bolt assembly
(10) fork damper assembly
(11) lock nut wrench
7. Remove the disc cover (12) by removing disc
cover socket bolts (13).
90
Servicing Your Honda
(12)
(13)
(12) disc cover
8. Remove the front axle nut (14) and loosen the
axle pinch bolts (15) on both forks.
(10)
Pull the front axle shaft (16) out of the wheel
hub and remove the front wheel with collars
(17).
(8)
(17)
(14) front axle nut
(15) axle pinch bolts
9. Remove the brake hose clamp bolts (18), stay
A (19) and stay B (20).
10. Remove the front brake caliper mounting bolts
(21) and brake caliper (22).
• Do not support the brake caliper by the brake
hose.
(13) disc cover socket bolts
(15) (15)
(14) (16) (17)
(16) front axle shaft
(17) collars
• Do not operate the brake lever after the front
wheel is removed. To do so will cause
difficulty in fitting the brake disc between
the brake pads.
(20)
(21)
(18)
(19)
(18) brake hose clamp bolts
(19) stay A
(20) stay B
(21) front brake caliper mounting bolts
(22) brake caliper
11. Remove the fork protector socket bolts (23)
and fork protectors (24).
(24)
(23)
(23) fork protector socket bolts
(24) fork protectors
(22)
(23)