Honda CRF250R 2018 Owner's Manual page 71

Clutch System
3. Insert the clutch lifter rod (7) into the
mainshaft.
4. Apply engine oil to the clutch lifter (8), install
the clutch lifter onto the clutch lifter rod.
(8)
(7) clutch lifter rod (8) clutch lifter
5. Install the clutch pressure plate (9).
6. Install the five clutch springs and bolts (10).
7. Tighten the bolts in a crisscross pattern in two
or three steps to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
(10)
(9) clutch pressure plate
(10) clutch springs and bolts
66
Servicing Your Honda
8. Apply engine oil to a new O-ring (11) and
install it in the groove of the clutch cover (12).
(12)
(7)
(11) O-ring (new)
(12) clutch cover
9. Install the cover by tightening a new washer
(13), four clutch cover A bolts (14) and two
clutch cover B bolts (15) in a crisscross pattern
in two or three steps to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
(14)
(9)
(13) washer (new)
(14) clutch cover A bolts
(15) clutch cover B bolts
10. Fill the crankcase with the recommended
engine oil. (page 52).
(11)
(13)
(15)