Honda CRF250R 2018 Owner's Manual page 54

11. Install the fuel pump plate (32) by aligning
with its groove (33) with fuel pump unit lug
(34).
Check the dust seal lug (24) is in position as
shown.
(34)
(24)
(24) dust seal lug
(32) fuel pump plate
(33) groove
(34) fuel pump unit lug
12. Install the conical spring washers (35), collars
(36), washer (37), stopper cable (38), stopper
cable guide (39), fuel pump mounting nuts (40)
and fuel pump mounting cap nut (41).
Make sure that the convex surfaces of the conical
spring washers are upside.
Make sure that the cap nut is in position of the
(32)
identification mark (42) on the fuel pump plate
(32).
(38)
(39)
(33)
Upside
(35)
(42)
(32) fuel pump plate
(35) conical spring washers
(36) collars
(37) washer
(38) stopper cable
(39) stopper cable guide
(40) fuel pump mounting nuts
(41) fuel pump mounting cap nut
(42) identification mark
13. Tighten the fuel pump mounting nuts (40) and
cap nut (41) to the specified torque in the
specified sequence as shown:
8 lbf·ft (11 N·m, 1.1 kgf·m)
(41)
(40)
(37)
(40) fuel pump mounting nuts
(41) fuel pump mounting cap nut
(36)
14. Install the harness band clip (43) to the stopper
cable guide (39).
15. Install the stopper cable (38) to the frame hook
(44) of the frame while holding the fuel tank
(30).
(30)
(35)
(32)
(30) fuel tank
(38) stopper cable
(39) stopper cable guide
16. Connect the fuel line (page 43).
17. Increase the fuel pressure (page 50).
18. Install the fuel tank (page 35).
Fuel System
1 3
6
(41) 4
(39)
(43)
(43) harness band clip
(44) frame hook
Servicing Your Honda
(40)
5
2
(38)
(44)
49