Fuel Tank - Honda CRF250R 2018 Owner's Manual

Fuel Tank

Fuel Tank

Refer to Important Safety Precautions on page 23.
Removal
1. Remove the seat (page 33).
2. Remove the shroud A bolt (1), shroud B bolt
(2) and shroud C bolt (3).
3. Slide the shroud (4) toward the up to separate
from the air cleaner housing cover (5), and
then remove the shroud.
The right and left shrouds can be removed in the
same manner.
(3)
(2)
(1)
(1) shroud A bolt (4) shroud
(2) shroud B bolt (5) air cleaner housing cover
(3) shroud C bolt
4. Disconnect the overflow hose (6) from the
clamp (7).
(7)
(6) overflow hose (7) clamp
34
Servicing Your Honda
5. Install a hose clamp (8) to the breather tube (9)
and set the hose clamp securely.
6. Pull the breather tube (9) out of steering stem
nut (10).
(4)
(5)
(10)
(8) hose clamp
(9) breather tube
7. Remove the fuel tank A bolt (11), B bolts (12)
and washers (13).
(6)
(11) fuel tank A bolt
(12) fuel tank B bolts
8. Lift the fuel tank (14) out of the frame and
hang it to the left of the frame.
Check the fuel tank stopper cable (15) for
deterioration, kinks or other damage.
(9)
(8)
(10) steering stem nut
(11)
(12)
(13)
(13) washers
Do not support the fuel tank by the fuel feed
hose (16).
NOTICE
The fuel tank is made of titanium material. Since
the fuel tank has not been painted, it might be
discolored with mud and dust.
To remove mud or dust, use a sponge or soft cloth
and a stainless steel kitchen detergent, then rinse
well clean water.
After washing, rinse with plenty of water and dry
with a clean cloth.
WARNING
Gasoline is highly flammable and
explosive.
You can be burned or seriously injured
when handling fuel.
• Stop the engine and keep heat, sparks
and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
(14)
(16)
(14) fuel tank
(15) fuel tank stopper cable
(16) fuel feed hose
(15)