Honda CRF250R 2018 Owner's Manual page 53

Fuel System
5. Apply small amount of engine oil to a new
O-ring (12).
Install the new O-ring to the fuel pump base
(13).
6. Install the fuel pump unit holder assembly (14)
into the fuel pump base while aligning its
hooks (15) with the grooves (16) in the fuel
pump base tabs (17).
If the gap between the hooks and tabs is more
than 0.04 in (1.0 mm), replace the fuel pump
unit.
Be sure that the hooks are completely seated.
(15)
(16) (17)
(12)
(12) O-ring (new)
(13) fuel pump base
(14) fuel pump unit holder assembly
(15) hooks
(16) grooves
(17) tabs
7. Connect the fuel pump yellow (18) and green
(19) wire terminals to the fuel pump base
terminals (20). Push the wire terminals until
they stop as shown.
Be careful not to damage the wires.
48
Servicing Your Honda
(19)
(18) yellow wire terminal
(19) green wire terminal
(14)
(20) fuel pump base terminals
8. Install a new dust seal (21) by aligning its tabs
(22) with the fuel pump unit grooves (23).
Check the dust seal lug (24) which is located the
index mark (25) of the fuel pump base (13).
(13)
(22) (23)
(13)
(16) (17)
(21)
(24)
(13) fuel pump base
(21) dust seal (new)
(22) tabs
(18)
(18)
(19)
(20)
(20)
(24)
(25)
(23) grooves
(24) dust seal lug
(25) index mark
9. Apply small amount of engine oil to a new
O-ring (26).
Install the new O-ring into the between the
collar A (27) and collar B (28) of the fuel pump
unit (29).
(29)
(26)
(26) O-ring (new) (28) collar B
(27) collar A (29) fuel pump unit
10. Install the fuel pump unit (29) into the fuel tank
(30) with its hose joint (31) facing forward.
Be careful not to damage the fuel pump unit.
(30) (31)
(29) fuel pump unit
(30) fuel tank
(31) hose joint
(27)
(28)
(29)