Variable Search System - Samsung DVD-VR350M Instruction Manual

Go to Zero
End search
Forward Intro Scan
Reverse Intro Scan
Move Ok
> s
Go to Zero
End search
Forward Intro Scan
Reverse Intro Scan
> Move s Ok
Go to Zero
End search
Forward Intro Scan
Reverse Intro Scan
> Move s Ok

Variable Search System

Each time you record a cassette on this DVD Recorder & VCR,
an index is automatically marked on the tape when recording is
started.The Search function allows you to fast-forward or rewind to
a specifi c index and start playback from that point.
•
This DVD Recorder & VCR uses a standard indexing system (VISS).
As a result, it will recognize any indexes marked by other VCRs using the
same system and vice versa.
Go To Zero
Use this feature when you want to search for the 0:00:00 counter
position on a cassette.
1. Press the CANCEL button at the point on the tape where you want to
set the counter to 0:00:00.
2. While a cassette is stopped, press the ANYKEY button.
Press the ▲▼ buttons to select Go To Zero, then press the OK button.
3.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
End Search
Use this feature when you want to search for a blank position to
record a programme on a cassette.
1. While a cassette is stopped, press the ANYKEY button.
Press the ▲▼ buttons to select End Search, then press the OK button.
2.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position. If the VCR reaches the end of the
tape during end search, the tape will be ejected.
Forward/Reverse Intro Scan
Use scan and play when you don't know exactly where a programme
is located on a cassette tape.
1. While a cassette is stopped, press the ANYKEY button.
Press the ▲▼ buttons to select Forward Intro Scan or Reverse Intro
2.
Scan, then press the OK button.
When an Index mark is found the DVD Recorder & VCR will playback
the tape for 5 seconds, after which it will continue searching for the
next Index mark.
English - 52