Recording Through A Dv Input Jack - Samsung DVD-VR350M Instruction Manual

DV     ►  
Move Ok Exit
< s
M

In DTV mode, if you press the PAUSE button:
- The channel will not be switched and the TV/RADIO key is
disabled.
- Switching to the analog channel or changing the input source will be
applied after the recording is stopped.

In ANALOG mode, if you press the PAUSE button:
- Switching to DTV mode will be applied after the recording is
stopped.
To stop recording
Press the STOP button to stop a recording in progress.
•
When using DVD-RW/DVD-R discs, the message "Updating the
information of disc. Please wait for a moment. " is displayed.
M

You can not change the recording mode and the programme while
recording.

Recording will stop automatically if there is no free space left for
recording.

Up to 99 titles can be recorded onto a DVD-RW/-R disc.

If the power interrupted due to power failure or other reasons, the
title being recorded will not be saved onto the disc.

Recording will stop automatically if a copy protected image is
selected.

Do not use DVD-R authoring discs with this unit.

Also refer to the user manual for your External Devices when
recording from external equipment using the Audio/Video cable or
scart cable.

Recording through a DV Input jack

You may control the Camcorder using the IEEE1394 (DV) interface.
Follow these directions to record onto a disc or tape from a
camcorder that has a DV output jack.
1. Connect the DV output jack of your camcorder to the DV input jack on
the front of your DVD Recorder & VCR using a DV cable.
2. Power on your DVD Recorder & VCR and switch to DV mode by
pressing the INPUT SEL. button on the remote control.
3. Press the REC MODE button repeatedly to select the recording Mode
(quality).
➞ HQ ➞ HSP ➞ SP ➞ LSP ➞ ESP ➞ LP ➞ EP ➞ SLP
4. If the input is set to DV, a playback/record menu that enables
camcorder control appears on the top of the screen.
5. Select the Playback related icons on the upper part of the screen to
playback the camcorder and fi nd the starting position to copy.
To start recording, Press the ◄► buttons to select REC (●) icon in the
6.
top side of the screen, then press the OK button.
You can press the REC button on the remote control to start recording
7. Press the STOP button on your DVD Recorder & VCR when the
recording is fi nished.
English - 58