Using The Shaver - Philips NORELCO S7000 Manual

Unpair the shaver and smartphone

Using the shaver

Pairing allows a connection between 1 shaver
and 1 smartphone. To remove this connection
(e.g. when you have a new smartphone), use
the following steps:
1 Unpair the shaver: press and hold the
on/off button on the handle for approx. 10
seconds to remove the bond between
shaver and app.
Note: The unpairing of the shaver is
successful when the notification symbol
lights up 4 times briefly.
2 Unpair your smartphone: go to 'Settings' on
your smartphone and select Bluetooth.
Then select ' Shaver S79xx' and press
'forget' or 'unpair'.
Note: The unpairing procedure may vary per
smartphone. Please check your smartphone
manual for more information.
Always check the shaver and all accessories
before use. Do not use the shaver or any
accessory if it is damaged, as this may cause
injury. Always replace a damaged part with
one of the original type.
Note: This shaver is waterproof. It is suitable
for use in the bath or shower and for cleaning
17
English