Philips NORELCO S7000 Manual page 15

Charging with the power cord
1
2
Charging in the SmartClean system
1
2
1 Make sure the shaver is switched off.
2 Put the small plug in the shaver and put the
power cord in the wall outlet.
The display of the shaver indicates that the
shaver is charging.
3 After charging, remove the power cord from
the wall outlet and pull the small plug out of
the shaver.
Note: When the battery is full, the display
switches off automatically after 30 minutes.
1 Put the small plug in the back of the
SmartClean system.
2 Put the supply unit in the wall outlet.
3 Press to open the SmartClean system cap,
to be able to place the shaver in the holder
('click').
4 Hold the shaver upside down above the
holder. Make sure the front of the shaver
points towards the SmartClean system
holder.
15
English