Philips NORELCO S7000 Manual page 30

30
English
2
1
3 Rinse the hair chamber and shaving head
holder under the tap with warm water.
4 Turn the retaining ring counter clockwise
and lift it off the shaving head.
Repeat this process for the other retaining
rings. Place them aside in a safe place.
5 Remove the shaving heads from the
shaving head holder. Each shaving head
consists of a cutter and guard.
Note: Do not clean more than one cutter
and guard at a time, since they are all
matching sets. If you accidentally put a
cutter in the wrong shaving guard, it may
take several weeks before optimal shaving
performance is restored.
6 Clean the cutter and guard with warm
water.
7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving
head holder.
10 Place the retaining ring on the shaving
head.