Philips NORELCO S7000 Manual page 37

The shaver does
not work when I
press the on/off
button.
Water is leaking
from the bottom of
the shaver.
Hairs or dirt
obstruct the
shaving heads.
The shaver is still
attached to the wall
outlet. For safety
reasons, the shaver
can only be used
without cord.
The rechargeable
battery is empty.
The travel lock is
activated.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
During cleaning,
water may collect
between the inner
body and the outer
shell of the shaver.
English
Clean the shaving
heads in the regular
way (see 'Cleaning
the shaver under
the tap') or clean
them thoroughly.
Unplug the shaver
and press the
on/off button to
switch on the
shaver.
Charge the battery.
Press the on/off
button for 3
seconds to
deactivate the
travel lock.
Clean the shaving
heads thoroughly
or replace them.
This is normal and
not dangerous
because all
electronics are
enclosed in a
sealed power unit
inside the shaver.
37