Using the AUX input
The Bluetooth Speaker has an AUX input (Line In) at its back, for you to use
a 3.5mm stereo audio cable to connect it to other audio player.
1.
Connect one end of the 3.5mm stereo audio cable (supplied) to the
AUX jack at the back of the speaker, and the other end to your audio
player, smart phone or audio device etc.
2.
Switch the speaker on.
3.
Press the MODE button on the unit to select Line In mode.
The speaker will play the sound input through the connected cable.
4.
Notes:
In AUX (Line-In) mode, the control buttons on the unit don't work,
except the volume control knob.
The ultimate sound volume can be adjusted by using the volume
controls of both your connected device and the speaker.
-13-
POWER