Wake The System; Contacts - Polycom RealPresence Group Series Documentation

Related Topics
Using a Polycom RealPresence Group Series Remote Control

Wake the System

After a certain amount of time with no activity, the RealPresence Group Series system goes into sleep
mode.
Procedure
•
Press any button on the remote control or just pick up the remote.
Related Topics
Using a Polycom RealPresence Group Series Remote Control

Contacts

The directory on your system stores contact information that you can use to quickly call contacts. Any
contacts that you add to the directory are accessible to everyone at your site who uses the system.
Users at other sites cannot access the contacts on your system.
When a contact is listed in the directory of your system, the system displays the name on the screen
when receiving an incoming call. If a contact that is not listed in the directory calls, the dialing
information for that contact displays, and you can choose to save the information in the directory when
the call ends.
Your system supports up to 2,000 contacts, or an unlimited number of contacts when the system is
registered with Microsoft Lync Server 2013 or Skype for Business Server 2015. If your system is
registered with one of the supported Microsoft servers, you can search the directory, view a list of
contacts, view contact presence states, and call contacts from the directory.
Printed from Polycom, Inc. (http://documents.polycom.com) Page 13