Install The Cable-Management Arm - IBM p5 520 Quick Start Manual

6

Install the cable-management arm

6.1
Locate the cable-management arm
Tip: If space is limited inside the rack, slide the server out part of the way to install the
cable-management arm.
From the back of the rack, use the pin
6.2
left slide-rail management arm flange that is attached to the rack frame .
Use the second pin
6.3
flange
B
C
-
A
to affix the other end of the cable-management arm
C
that is attached to the sliding portion of the left slide rail assembly .
A
D
E A
and the two pins .
A
to affix the cable-management arm
E
E
to the
D
E
to the
B