Advertisement
6
Install the cable-management arm
Insert the cable-management arm
6.1
Tip: If space is limited inside the rack, slide an adjacent server out partway to
install the cable-management arm.
When the cable-management arm is seated into all four slots, slide the cable-
6.2
management arm to the left, and lock it into place by pulling the locking cam
back, away from the server.
6.3
Align the latch
Tip: After you have cabled your server, use the straps that are attached to the
cable-management arm to secure the cables.
You have finished installing the server into the rack. Go to task 10
and the server
B
C
A
D
with the rail on the right and snap the latch onto the rail.
.
B
D
A
B
into the four slots
in the back of the server.
Cable the HMC
C
Advertisement
