Install The Cable-Management Arm - IBM eserver p5 510 Quick Start Manual

6

Install the cable-management arm

B
6.1
Locate the cable-management arm
Tip: If space is limited inside the rack, slide the server out part of the way to install
the cable-management arm.
From the back of the rack, use the pin
6.2
the left slide-rail-management arm flange that is attached to the rack frame .
Use the second pin
6.3
flange
C
A
to affix the other end of the cable-management arm
C
that is attached to the sliding portion of the left slide rail assembly .
A
E
D
E
and the two pins .
A
to affix the cable-management arm
A
E
B
E
to
D
to the