Advertisement
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com
1.0 Product Description
1.1 General Description
Emergency Stop
Emergency Stop
Touch Screen HMI
Digital speed readout
Easy to use
Easy to Operate Interface
Control Panel
Variable Speed Control
Variable Screen Control
(50-1500 rpm)
(50-1500 rpm)
The PICO-155S is a precision wafering saw for
sectioning delicate specimens ranging from fish
bones to microelectronic components. It is an
ideal saw for the metallographic laboratory. The
PICO-155S has the ability to cut at speeds
ranging from 50 to 1500 rpm, with loads ranging
from 0 up to 1000 grams.
The PICO-155S is very robust and durable
precision saw with its cast aluminum alloy and
stainless steel construction. The PICO-155S
utilizes diamond wafering blades ranging from 3
to 7-inches in diameter. A new feature and benefit
of the PICO-155S is that it uses a pump coolant
system for better lubrication at the cutting surface
as compared to traditional gravity drag lubricant
machines. This is especially important for cutting
with smaller diameter wafering blades.
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
PICO 155S Precision Saw
Weight Loading Arm
Magnetic Safety Switch
Sliding Load Arm
Magnetic Safety Switch
I
M
NSTRUCTION
ANUAL
Web: http://www.metallographic.com
Coolant
Cooling Nozzles
Nozzles
Micrometer
Micrometer Feed Control
Feed Control
Removable
Easy to Remove Cooling
Coolant Tank
Tank
Capable of using a
wide range of wafering
blade diameters
Blade Dressing
Fixture
1
Advertisement
