Advertisement
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com
2.3.1 Installation - Coolant Tank
1. Insert Stainless Steel Tank cover tray
onto coolant tank with the larger
diameter hole located on the back
right side of the tank. Slide tank into
chamber.
2. Slide in the left side of the two-piece
stainless steel sample tray cover and
then the right side cover.
3. Clean and insert pump filter through
both the sample tray cover and the
stainless steel tank cover
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
PICO-155S Precision Saw
Insert RIGHT
I
NSTRUCTION
Web: http://www.metallographic.com
Insert LEFT
sample tray
cover
sample tray
cover
Feed Filter
through the hole
M
ANUAL
6
Advertisement
