Advertisement
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com
2.3.5 Installation -
dressing fixture
For optimum cutting
performance it is
recommended that the
wafering blade be
periodically dressed. This
will improve or decrease
cutting times as well as
extend the life of the blade.
Note: Even for hard ceramics
materials dressing is
important as the wafering
blades are metal pressed
blades and the metal from
the blade itself can coat or
blind the diamond thus
resulting in less efficient
cutting.
Proper dressing should be
conducted at slow speeds
and low loads (e.g. 300 rpm
and low feed rate). The
Dressing button should be
used to set the machine to
the proper rpm.
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
PICO-155S Precision Saw
Select proper dressing stone.
Install onto the Dressing Fixture
and secure it with the allen head
screws
Slowly feed dressing stone into
wafering blade while running saw at
a slow speed
I
M
NSTRUCTION
ANUAL
Web: http://www.metallographic.com
Align dressing fixture with lip on
front of casting panel with opening
in cover. Then attach the Dressing
Fixture to the cover with the allen
screws.
10
Advertisement
