Table of Contents
Advertisement
Setup Operations – SETUP
Peripheral Device Settings
Select F6 (PERIPH) from the Setup main menu to make settings related to
peripheral devices.
Button
Main menu
F6 (PERIPH):
Make settings
for peripheral
SETUP
devices.
→
a) The output for the video signal to DME channel 1 is always AUX1.
b) The output for the key signal to DME channel 1 is always E-PVW.
9-12
Chapter 9 System Setup
Peripheral device setting menu
Level 1
F2 (DME): Make
F6 (DME): Select
DME interface
DME to use.
settings.
(INT/EXT)
→
INT: Use
EXT: Use
Specify
Submenus
Level 2
F2 (DME 1V): Set the
cross-point number at
which a video signal
output to DME channel
1 connected to the
internal DME.
switcher is reinput.
To make the setting,
external DME.
hold down F2, and press
the corresponding one
external DME. →
of the AUX BUSES
buttons.
F3 (DME 1K): Set the
cross-point number at
which a key signal
output to DME channel
1 connected to the
switcher is reinput.
To make the setting,
hold down F3, and press
the corresponding one
of the AUX BUSES
buttons.
Level 3
a)
b)
Advertisement
Table of Contents
