Input Signal Settings - Sony HDS-7100 User Manual

Input Signal Settings

Select F3 (INPUT) from the Setup main menu to make settings related to
input signals.
Button Main menu
F3 (INPUT):
Make input
signal settings.
→
SETUP
Input signal setting menu
Level 1
F2 (XPT): Make cross- F2 (BUTTON): Hold down this button and
point settings.
→
F3 (SOURCE): Pressing this button assigns
F4 (LIST): Turn the control knob to display the
F3 (AUTO): Make key F2 (FILL): Hold down this button and press
source to key fill
assignment.
→
F3 (SOURCE): Hold down this button and
F4 (ADJUST): Make F2 (BUTTON): Hold down this button and
input signal
adjustments.
→
F4 (PHASE): Use the control knob to adjust
F6 (REF): Select
reference input.
TRI: HD tri-level sync
BB: black burst
Submenus
Level 2
press the one of the AUX BUSES buttons to
which you wish to assign the signal. The
number of that button is displayed.
the name displayed in F4 to F2.
required signal name. (See page 9-8.)
the one of the AUX BUSES buttons
corresponding to the key fill signal. The
number of that button is displayed.
press the one of the AUX BUSES buttons
corresponding to the key source signal. The
number of that button is displayed.
press the one of the AUX BUSES buttons for
the signal to be adjusted. The number of that
button is displayed.
the horizontal phase.
(–16 to +16CK (clock cycles); steps of 1
cycle)
—
Chapter 9 System Setup
9-7