Advanced Setup - Brady 2024 User Manual

BASIC FUNCTION
INTERNAL BATCH
ENABLE
DISABLE*
BASIC FUNCTION
CONVERSION
METRIC
DECIMAL*
BASIC FUNCTION
TOF ADJUST

Advanced Setup

ADVANCED SETUP
COUNTERS
ABSOLUTE VALS.
RESETTABLE VALS.
RESET COUNTERS
ADVANCED SETUP
DATE/TIME
SET DAY NAME day
hh:mm a dd mon yr
ADVANCED SETUP
LABEL OPTIONS
HEAT SETTING
PRINT SPEED
SLEW SPEED
BACKFEED SPEED
ROW ADJUST
COLUMN ADJUST
CONT. LABEL LEN
* represents default setting
_______________________________________________________________________
30
• Allows internal label creation with Internal Batch
Cartridge
• Used to set the Printer's system of measurement
• Printer interprets all measurements as metric values
• Printer interprets all measurements as decimal values
• Selects the point where the label's edge is detected by
the sensor
• Set start of print from the label's edge. 128 sets the
start
of print approximately .3 inches, (7.6 mm) from the
label's edge
• Non-resettable counter (viewed only)
• User resettable counter (can keep track of labels)
• Resettable values re-start at 0
• Allows current date and time to be set
• Values: 00 to 30, (*10) (0 = lightest, 30 =darkest)
• Values: 2ips to 10ips, (*6) (Print speed/ inches per
sec)
• Values: 2ips to 10ips, (*7) (Label feed rate/ inches
per
sec.
• Values: 2ips to 5ips, (*3.5), (rate the printer backs up
label
• Vertical position where printing begins, (*0) (shifts
up)
• Values 0 to 410, (0*)
• Values 0000 to 9999, (*0) (00.00 to 99.99")
(label page length)
Using Your Printer