Brady 2024 User Manual page 53

There are two special commands used by the Printer, the STX S (Recall Global
Data) and the STX T (Print Date and Time) commands. Unlike the other Label
Format Commands, which follow the STX L command, these special
commands are entered directly into the data field.
Character Description
<STX>S Recall global data and place in field.
<STX>T Print time and date.
Table 4-5 Special Label Formatting Commands
Bitmapped font loading commands are usually generated by font creation
software. However, the assigned font ID number command must be sent to the
Printer before the font file. Refer to Table 4-6 for the font loading command
characters.
The downloaded font will be stored in the "default" module, (see STX X).
Command Description
Character
*c###D Assign Font ID Number
)s###W Font Descripton
*c###E Character Code
(s#W Character Download Data <ESC>(s###Wnn...n
Table 4-6 Bitmapped Font Loading Commands
_____________________________________________________________________________________________________
Printing Labels
Format
<ESC>*c###D
### = font ID Number 100 to 999
<ESC>)s#W
# = Bytes of Font Descriptor Data
<ESC>*c###E
# = ASCII Value of Character
# = Bytes of Bit-mapped Data
nn..n = Bit mapped data
47