Optional Lcd/Keypad Front Panel Alarms - Brady 2024 User Manual

5.2.1

Optional LCD/Keypad Front Panel Alarms

If the Printer is equipped with the Optional LCD/Keypad Front Panel, it has
built in monitors for the Printer status and stock conditions. The alarm
messages will be displayed on the front panel LCD display indicating the
present status of the Printer, stock levels, or whether the Printer's electronics
have detected an error condition.
LCD Display
PROM FAULT
RAM FAULT
RTC RAM FAULT
PRINT HEAD FAULT
ADC FAULT
TOF FAULT
OUT OF STOCK
RIBBON FAULT
_____________________________________________________________________________________________________
56
Alarm Description
Power up initialization detected a PROM failure,
call for service.
Power up initialization detected a RAM failure,
call for service.
The RTC Non Volatile RAM failed its checksum
test, call for service.
The Thermal Printhead Control Circuit failed, call
for service.
The Analog to digital converter failed, call for
service.
The Printer failed to find the top of form position.
Possible causes:
Defective stock
Maximum Label Length, (set from
communications or front panel), is smaller than
one form.
The Printer is out of stock.
The ribbon system detected a fault
Possible causes:
Out of ribbon
Ribbon motion was prohibited
Obstructions in the paper movement may cause
ribbon faults.
Maintenance and Adjustments