Setup; Pause/Cut - Brady BMP 41 User Manual

28

Setup

Pause/Cut

Setup
The Setup function key is used to determine the default settings for the printer. To change
Setup functions:
1.
2.
3.
If a dialog box is associated with the specific Setup function, it displays upon pressing OK.
Pause/Cut
The Pause/Cut function allows you to remove a label from the printer before another label
starts printing. If this feature is turned on, when printing a string of labels, cutting a label
initiates the next label to print. To turn on the Pause/Cut function:
1.
The Pause/Cut menu, being first in the list of primary menus, is already selected.
2.
3.
®
BMP 41 User's Manual
Press Setup
Using navigation keys, choose the setup function to change.
Press Enter .
Press Setup
Using navigation keys, choose Pause/Cut>On.
Press Enter .
Note:
Your Pause/Cut preferences, whether to pause the printer for cutting after
each label or at the end of the job, must be set in the printer's properties. Refer to
page 11 of this document for information on setting these preferences.
Figure 8 • Setup menu options
.
.