Maintenance; Introduction; Cleaning The Printhead - Brady 1024 User Manual

Maintenance

3.0

Introduction

This chapter will cover the cleaning, adjusting, and some troubleshooting
tips involved with your Printer.
3.1

Cleaning the Printhead

Warning: Turn 'off' the Printer and unplug the unit from the outlet
before cleaning the Printhead.
The Printhead should be cleaned every time a new roll of media is
installed. Follow the instructions below for proper cleaning.
1. Turn OFF the Printer, open the Top Cover.
2. Unlatch the Printhead Assembly, raise it to its up position.
3. Using a cotton swab dipped in isopropyl alcohol, clean the Printhead
by rubbing the cotton swab along the Printhead.
Figure 3-1 Cleaning Printhead
28 Maintenance