Configuration Command String - Brady 1024 User Manual

2.3

Configuration Command String

The Configuration Command String sets the operating parameters of the
Printer. The Command Strings are described below.
<STX>KDwxy
<CR>
where w:
Bit # Function
0-2 Baud Rate
3 Word Length
4&5 Unused
6 Always 1
7 Always 0
where x:
Bit # Function
0 Print Method
1 Present Sensor
2 Alternate Char.
Set
3 Cutter
4&5 Unused
6 Always 1
7 Always 0
where y:
Bit # Function
0&1 Paper Type
2 Linerless
3-5 Unused
6 Always 1
7 Always 0
Example:
<STX>KD @A@
<CR>
@ Sets the Printer to: 9600 baud; 8 bit word length/no parity.
A Sets the Printer to: thermal transfer; no present sensor; standard
character set; no cutter.
24
Value
0=9600, 1=600, 2=2400, 3=19200, 4=4800, 5=N/A,
6=1200, 7=9600 Test Mode
0=8 bits, 1=7bits
Set to 0
Set to 1
Set to 0
Value
0=direct, 1=transfer
0=not equipped, 1=equipped
0=standard, 1=main frame
0=disabled, 1=enabled
Set to 0
Set to 1
Set to 0
Value
0=gap(edge), 1=reflective, 2=continuous (3")
0=not equipped, 1=equipped
Set to 0
Set to 1
Set to 0
Printing Labels