Advertisement
MUDS663042, MUDS663048, MUDS723042, MUDS723048 - INSTRUCTIONS
STEP 7A: Attach Long Modesty(I) to existing Corner Leg(G) and add a second Corner Leg(G) with 1 Bolt(O) and 1 Washers(N) each
leg. ONLY HAND TIGHTEN AS THIS WILL BE REMOVED LATER.
STEP 7B: Connect the second End Leg to the remaining Short Modesty(J) and Corner Leg(G) with 4 Bolts(O) and 4 Washers(N).
TIGHTEN STEP 7B BOLTS.
G
G
I
O/N
(N,O)
O/N
STEP 8: Square the legs and modesties using a tape measure. Arrange all metal components so there is an equal margin on the
top/bottom & left/right sides. Connect the End Legs and Corner Legs(G) to the tops as figure 1 and 2 depict. For extra support connect
the Short Modesties(J) to the table top using 2 Screws(Q) each modesty.
Q
Q
Bottom
Figure 1
Q
Right
Left
G
Q
Q
Q
Figure 2
Top
Any problems or questions call Regency Office Furniture at 1-866-816-9822
Advertisement
