Advertisement
MUDS663042, MUDS663048, MUDS723042, MUDS723048 - INSTRUCTIONS
STEP 1: Insert 2 Glides(P) into each of the Foot Brackets(B).
P
BEFORE STARTING STEP 3A-B, NOTE THE HOLE PLACEMENT IN FIGURE 1.
The set of three holes on each of the Front Supports and Back Supports should face in toward one another.
STEP 3A: Assemble Legs by inserting Back Supports(C) into each Foot Bracket(B).
NOTE: Modesty Holes on Back Supports should face interior side as shown below.
STEP 3B: Now insert the Front Supports(D) into each Foot Bracket(B). Then insert each Top Bracket(A) into the Front
Supports(D) and Back Supports(C). Finally, attach the Foot Brackets(B) and Top Brackets(A) to the Front Supports(D) and Back
Supports(C)with 4 Bolts(O) per Leg.
NOTE: Do not tighten bolts until all bolts have been started.
A
D
B
Left Leg
(interior side)
Any problems or questions call Regency Office Furniture at 1-866-816-9822
B
P
O
O
Modesty Holes
C
O
O
STEP 2: Insert 1 Glide(P) into each Corner Leg(G).
O
O
A
C
D
B
Right Leg
O
O
(interior side)
G
P
Figure 1
Advertisement
