Regency Kobe MKTRCT4824 Assembly And Installation

(MKTRCT4824, MKTRCT6024, MKTRCT7224, MKTRCC4824, MKTRCC6024, MKTRCC7224)
Organize your parts. You will need a phillips head screw driver, pencil and measuring tape, drill(optional).
Parts & Hardware:
A: Table Top • B: T-base Leg(2) • C: Glides/Casters(4) • D: Screw(16)
A
Step 1:
Screw 2 Glides/Casters
Leg (B)
.
B
C
Step 2:
On a clean flat surface, place desired finish of
.
Table Top(A) face down
Kobe T-Base Assembly and Installation
Two people are required for assembly.
(Depending on the product, PART C will be 4 Glides OR 4 Casters)
B
(C)
into each T-base
C
Step 3:
Prepare your Template (INCLUDED) by taping both
template pages to one another on the dashed line.
EXAMPLE
4"
LINE UP TOP EDGE OF SECOND SHEET HERE.
ALIGN THIS CORNER
WITH TABLE TOP
CORNER
D
9.5"