26 Small form factor pluggable transceivers
4
Job aid: locking and extractor mechanisms
Depending on the transceiver manufacturer, your SFP transceiver can
have various types of locking/extractor mechanisms.
The following figures shows a typical mechanisms used on SFP
transceivers; other locking/extractor mechanisms exist, although they are
not shown here. In the figure
mechanism" (page
bail to release the device.
Figure 1
SFP with bail lock and extraction mechanism
The following figure shows the 1000BASE-SX MT-RJ SFP. Push the tab
to release the device.
Copyright © 2007-2008 Nortel Networks
.
Remove the dust cover from the optical bore and insert the fiber
optic connector.
Figure 1 "SFP with bail lock and extraction
26), the SFP still has the bore plug installed. Pull the
Nortel Ethernet Routing Switch 4500 Series
Installation — SFPs and XFPs
NN47205-301 02.01
20 October 2008
--End--