Nortel 4500 Series Installation Manual page 23

The SFPs described in this section do not have Digital Diagnostic Interface
capability, and are RoHS -E5 compliant.
CWDM SFPS are also supported. CWDM technology consolidates
multiple optical channels on a common optical fiber. CWDM uses multiple
wavelengths to expand available bandwidth.
CWDM SFPs are designed to support high speed data communications
for Metropolitan Area Networks (MANs). The system uses a grid of eight
CWDM optical wavelengths in both ring and point-to-point configurations.
All components are color-coded by wavelength.
ATTENTION
The attainable cable length can vary depending on the quality of the fiber optic
cable used.
Table 2
SFP models without DDI support
Model and connector
1000BASE-SX (LC)
1000BASE-SX (MT-RJ)
1000BASE-LX (LC)
1000BASE-XD CWDM (LC)
1000BASE-ZX CWDM (LC)
Copyright © 2007-2008 Nortel Networks
.
Product number
AA1419013-E5
AA1419014-E5
AA1419015-E5
AA1419025-E5 to
AA1419032-E5
AA1419033-E5 to
AA1419040-E5
Nortel Ethernet Routing Switch 4500 Series
Installation — SFPs and XFPs
NN47205-301 02.01
20 October 2008
Selecting an SFP 23
Description
850 (nm), up to 275 or 550 m
NOTE: This product is not
supported on the Ethernet Routing
Switch 4500 as of December 31,
2008. Use the newer version of
this product after December 31,
2008 (AA1419048-E6).
850 nm, up to 275 or 550 m
1310 nm, up to 10 km
NOTE: This product is not
supported on the Ethernet Routing
Switch 4500 as of December 31,
2008. Use the newer version of
this product after December 31,
2008 (AA1419049-E6).
1470 nm to 1610 nm, up to 40 km
1470 nm to 1610 nm, up to 70 km