The Salt Container; Adding Rinse Aid; Daily Use - Zanussi ZDV14002FA User Manual

Do not use detergent and do not load the
baskets.
When you start a programme, the appliance can
take up to 5 minutes to recharge the resin in the
water softener. It seems that the appliance is not
working. The washing phase starts only after this
procedure is completed. The procedure will be
repeated periodically.
Adding salt
Before first use put one litre of water in the salt container.
Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after
you fill the salt container, start a programme.

ADDING RINSE AID

The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot
rinse phase.

DAILY USE

1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in user mode.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill the rinse
aid dispenser.

THE SALT CONTAINER

The salt is used to recharge the resin in the water
softener and to assure good washing results in the
daily use.
2
1
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the
CAUTION! Only use salt specifically
designed for dishwashers.
type of load and the degree of soil.
1
2
9