• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. • Only for UK and Ireland. The appliance has a 13 amp mains plug. If it is necessary to www.zanussi.com...
• Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. Product description Lower spray arm Filters Rating plate Rinse aid dispenser Detergent dispenser Salt container Water hardness dial Upper spray arm Upper basket www.zanussi.com...
Refer to the supplied leaflet for test information. 4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance. Do not use detergent with this programme. www.zanussi.com...
5. Processing residues can stay in the appli- ance. Start a programme to remove them. Do not use detergent and do not load the baskets. Adjusting the water softener Hard water contains a high quantity of minerals that can cause damage to the appliance and www.zanussi.com...
Refer to ‘SETTING AND STARTING prevent it, after you fill the salt container, start a A PROGRAMME’. programme. 3. Press and hold the programme button until the programme indicator (A) flashes and the programme indicator (B) comes on. www.zanussi.com...
2. Press the on/off button to activate the appli- ance. Make sure that the appliance is in set- 3. Make sure that there is rinse aid in the rinse ting mode. Refer to ’SETTING AND aid dispenser. STARTING A PROGRAMME’. 4. Load the baskets. www.zanussi.com...
Page 8
1. Adjust the water softener to the lowest lev- 2. Set the rinse aid dispenser to the lowest position. If you stop to use the combi detergent tablets, before you start to use separately www.zanussi.com...
Care and cleaning Warning! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and clogged spray arms de- crease the washing results. Make a check regularly and, if necessary, clean them. www.zanussi.com...
The appliance does not fill with water. uously. • The end indicator flashes 1 time intermittently. • The indicator of the set programme flashes contin- The appliance does not drain the water. uously. • The end indicator flashes 2 times intermittently. www.zanussi.com...
Page 11
The spray arms are clogged. Remove remaining soil with a thin pointed object. The programme was not applicable Make sure that the programme is ap- for the type of load and soil. plicable for the type of load and soil. www.zanussi.com...
By ensuring this product where you purchased the product. is disposed of correctly, you will help prevent potential negative consequences for the • Discard correctly the packaging material. Re- cycle the materials with the symbol www.zanussi.com...