Zanussi ZDV12002FA User Manual
Hide thumbs Also See for ZDV12002FA:

Advertisement

User Manual
GETTING
STARTED?
EASY.
ZDV12002FA
EN User Manual
Dishwasher

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZDV12002FA

  • Page 1 User Manual GETTING STARTED? EASY. ZDV12002FA EN User Manual Dishwasher...
  • Page 2: Safety Information

    SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. GENERAL SAFETY This appliance is intended to be used in household and similar •...
  • Page 3: Safety Instructions

    been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Do not let children play with the appliance. • Keep all detergents away from children. • Keep children and pets away from the appliance door when it is •...
  • Page 4 DISPOSAL WARNING! Risk of injury or suffocation. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. • Remove the door catch to prevent children and pets to get closed in the appliance.
  • Page 5: Buttons/Features

    EASY START On/off button Programme button Programme indicators Indicators INDICATORS End indicator. Salt indicator. It is always off while the programme operates. PROGRAMMES Consumption values Degree of soil Programme Programme phases Type of load Duration Energy Water (min) (kWh) Normal soil •...
  • Page 6: Settings

    Consumption values Degree of soil Programme Programme phases Type of load Duration Energy Water (min) (kWh) • Prewash 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 2) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil.
  • Page 7 USER MODE While the appliance is in programme selection mode: 1. Press and hold programme button until the indicator starts to flash and the indicator is on. In user mode can be changed: • The level of the water softener according to the water hardness. •...
  • Page 8: Before First Use

    German degrees French degrees Water softener mmol/l Clarke degrees (°dH) (°fH) level 11 - 14 19 - 25 1.9 - 2.5 13 - 17 4 - 10 7 - 18 0.7 - 1.8 5 - 12 <4 <7 <0.7 < 5 1) Factory setting 2) Do not use salt at this level.
  • Page 9: Daily Use

    ADDING SALT Before first use put one litre of water in the salt container. Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. ADDING RINSE AID The rinse aid helps to dry the dishes without streaks and stains.
  • Page 10 ADDING MULTI-TABLETS • Do not fill the salt container and the rinse aid dispenser. • Adjust the water softener to the lowest level. • Set the rinse aid dispenser to the lowest position. STARTING A PROGRAMME 1. Keep the appliance door ajar. 2.
  • Page 11: Hints And Tips

    HINTS AND TIPS GENERAL • If you use multi-tablets you can select the Multitab option (if available). This option The following hints will ensure optimal cleaning and increases the cleaning and drying results with drying results in daily use and also help to protect the use of multi-tablets.
  • Page 12: Care And Cleaning

    • There is dishwasher salt and rinse aid (unless At the end of the programme water you use combi detergent tablets). can still remain on the sides and on • The position of the items in the baskets is the door of the appliance. correct.
  • Page 13: Troubleshooting

    • Do not use abrasive products, abrasive cleaning • If you regularly use short duration programmes, pads or solvents. these can leave deposits of grease and limescale inside the appliance. To prevent this, INTERNAL CLEANING we recommend to run long duration programmes at least 2 times per month.
  • Page 14: Specifications

    THE WASHING AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible solution There are whitish streaks or blu- • The release quantity of rinse aid is too much. Adjust the rinse ish layers on glasses and dishes. aid selector to a lower position. •...
  • Page 15: Environmental Concerns

    ENVIRONMENTAL CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste.
  • Page 16 WWW.ZANUSSI.COM/SHOP...

This manual is also suitable for:

Zdt12011faZdt 21001fa

Table of Contents